Home Strip X-Tex Textured Coatings Remover Questions & Answers
Hearing questions and answers about a product from customers and the manufacturer themselves can really help you understand what it can do and if it’s the right product for you. Find out the answers to all the questions you have about Eco Solutions Artex & Textured Coatings Remover here.
Customer Question:
Can this product be used if the substrate behind the artex is asbestos sheeting?
Homestrip Manufacturer Seller Answer:
If you mean just plasterboard without plaster on it then yes it has been used many times in this instance. Care does have to be taken though when you get down to that surface not to be over-aggressive as you can damage the paper surface.
Customer Question:
Will ExTex affect the plaster underneath the Artex?
Homestrip Manufacturer Seller Answer:
X-Tex won’t affect the underlying plaster surface. If the plaster is in good order you won’t have any issues
Customer Answer:
No, it shouldn’t affect the plaster underneath the artex. It makes the artex damp so you can scrape it off the plaster. If your artex is very thick it might need two applications, but it works well! I’d use it again.
Customer Answer:
No – plaster was not affected when I removed the artex – the scraper may “rough it up” slightly though.
Customer Answer:
Based on my previous DYI jobs, the answer is no. X-Tex did not damage the plaster. In fact, the scrap blade may potentially do that, if force is applied without accuracy. Thank you.
Customer Answer:
I used it on a bedroom ceiling did not affect the plaster
Customer Question:
Would this be ok to use on artexed wooden beams?
Homestrip Manufacturer Seller Answer:
Yes, it would be fine for removing Artex from beams. X-Tex won’t damage the wooden surface. Depending on how old the beams are there is the possibility of them being covered in a dark stain also. X-Tex will also remove this. If you require any further assistance please call the technical helpline number on the label and they can advise.
Customer Answer:
I would say yes / it basically turns it into a thick sludge you scrape off – so can’t see backing material making a huge difference – not sure if the wood would be stained after removal though
Customer Question:
What’s the best way to apply the product?
Homestrip Manufacturer Seller Answer:
The best way to apply is with a paintbrush and a wide one if used on large areas. Other people have used a roller in the past but don’t think you will get a good enough even application. Also, follow this link for more advice on removal – https://www.ecosolutions.co.uk/science-not-solvents-how-to-remove-artex-safely/
Customer Answer:
With a paintbrush
Customer Answer:
I used a thick brush
Customer Answer:
Paintbrush.
Customer Question:
How many walls will this 2.5-litre cover?
Homestrip Manufacturer Seller Answer:
6-9 sq meters 🤙 Approx
Customer Answer:
We used 2 tubs for one room 2.5m x 3m. But the artex was very thick. One tub would probably do 3-4 medium walls if not too thick.
Customer Answer:
Good Morning,
1 Litre will cover up to 2-3 square metres depending on coating and thickness. Hope this helps!
Customer Answer:
I did two to three coats of a ceiling at 4.5 m x 3.5 with one tub
Customer Answer:
One tub should do about 12 square metres. Don’t spread too thin or you’ll have to re-coat. Don’t try and do 12 sqm in one go, do a few metres at a time. Get yourself a wide scraper too.
Customer Question:
How much artex will 1 pot remove?
Homestrip Manufacturer Seller Answer:
Coverage of a 2.5-litre tub of X-Tex is approx. 6-9 sq metres.
Customer Answer:
It depends on the thickness of the artex and also how many layers of emulsion/paint there are. I found the pot went much further if I first removed the paint with a steamer. Also if the x tex dried out at all I wet it down again with water which makes it go further. I did a room 24ft x 12ft with a thick bark effect wall covering.
Customer Answer:
It all depends on how old/thick the coating is – I needed 3 for a small kitchen – but it does work if left on long enough prior to scraping – I’d also recommend a good quality scraper rather than a flimsy paper scraper
Customer Question:
Does this actually work? Got loads of artex all over my house? Do the walls need plastering after?
Homestrip Manufacturer Seller Answer:
Works very well! Please read this link here.
Customer Answer:
You probably know this already but get your Artex tested for asbestos content or assume that it contains asbestos. If it does, keep everything wet while scraping and wear a protective face mask and dust suit. Dispose of any waste as asbestos appropriately. It’s very dangerous stuff. Sorry, had to say this.
My experience is that it’s equivalent to a basic paint stripper. I cut a hatch pattern in my Artex with a Stanley knife, then applied a generous coating of this and then waited 30 minutes. Then re-wet it by spraying water over it, then started scraping. It’s fairly hard work. You don’t need to replaster depending on how good a plastering job is underneath, but you will need to fill any gouges from stripping. If you scrape anything that’s dry, stop. Re-wet with water, let it sit for 5 minutes and start again. You don’t want any dust.
If unlike me, you have plenty of money, you might consider getting a professional in. see less
Customer Answer:
Yes works very well try it on a small patch first, thin artex only needs an hour. If you have carpet remove them, i.e. roll up and take out of the room. It’s an incredibly messy process the old artex gets everywhere. Oh, and if it’s old get it checked for asbestos.
Customer Answer:
Yes but you need to leave it for several hours if the artex is painted or thick. It still needs to be scrapped off, But this helps soften it.
Customer Question:
Will it remove paint from brickwork?
Homestrip Manufacturer Seller Answer:
Your best option for removing paint from brickwork would be our Paint and varnish remover
Customer/Supplier Answer:
The best products to use in the range are EcoSolutions Paint & Varnish remover or Graffiti go. Hope this helps! TTB Supplies
About Eco Solution X-Tex
A technology-driven company, Eco Solutions has developed water-based paint strippers, coatings removers, and related products.
With over 40 years of paint removal experience, Eco Solutions specializes in water-based solutions.
We research, develop, and manufacture all of our products here in the UK.
Our X-Tex Artex Remover
Coatings with textured surfaces can be easily removed using our X-Tex Artex Remover utilising a working wet system which makes it safe to do.
Using this method, it is possible to remove textured coatings such as Artex without causing dust that contains asbestos fibres.
Developed using ‘science not solvents’ by Eco Solutions – the world’s most advanced, innovative water-based technology
Instructions For Use:
One of the fastest, easiest, and safest ways to remove Artex is by using X-Tex by Eco Solutions.
You can paint over the artex walls and ceilings with Eco Solutions X-Tex, you then scrape the artex off once it has softened. As a result of this process, the artex remains wet at all times and is known as a working wet system. This eliminates the risk of breathing in hazardous microfibers and prevents asbestos fibres from becoming airborne.
It is easier to remove it with a long-handled blade scraper, as it helps lift it from the surface, rather than spreading it around the wall.
-
- Surface adhesion is 100%
- Non-Hazardous
- Water-Based
- Ventilation is not necessary
- Fumes are non-existent
- There is no risk of burns to the skin
- Keeping children safe
- Keeping pets safe
X-Tex can also be applied overnight and covered with foil or plastic film. A foil application prevents X-Tex from drying out, forces the product down, and in most cases softens both the emulsion and the artex simultaneously. This application gets the best results and ensures you the X-Tex goes further.
Available in 2.5-litre tubs.
Removing textured wall and ceiling coverings using X-tex typically takes Typical Performance Textured Coatings such as Artex can take around 15-30 minutes depending on the thickness of the artex and area being removed.
Textured coatings 1-2 layers plus of paint up to 1 hour.
Multi-layered paint over textured coatings 1 hour to overnight.
X-Tex Remover Removes:
-
- Bonded and Non bonded textured coatings
- Painted wallpapers
- Textured paints
Product Features:
-
- Water-based
- Tough, not toxic
- Non-Hazardous
- Non-Toxic
- Non Caustic
- PH Neutral
- No Fumes
- No Skin Burns
- Non-Flammable
- Non-Combustible
- Clings 100% to all surfaces
- Keeps wet for long periods
- No H (hazard) or P (precautionary) statements on the label
Eco Solutions‘ products are all safe-to-use, water-based, non-toxic products and there is one for most jobs whether you are upcycling, cleaning or stripping in your home or commercially.
Grime Go removes all types of grease, oil, dirt, stains, grime, dirt, mould, adhesive residues and paint splashes. It can be used to prepare surfaces for re-painting or just to clean and brighten the substrate. No fumes, no skin burns, no abrasives and non-toxic.
Home Strip Paint & Varnish Remover remove lead-based paints, oil-based paints, solvent-based paints, water-based paints & emulsions, polyurethane, stains, varnishes and waxes, fire-resistant paints, rust-preventative surface coatings. It is ideal for use on all types of surfaces including: hard and softwood, marble, stone, brick, concrete, plaster, ceramic tiles, GRP, aluminium, brass, cast iron and other soft metals.
PVCU Cleaner cleans uPVC windows, doors and guttering (may etch certain types of Perspex and polycarbonate so do a patch test first). Removes heavy grime, dirt, oil, and paint splashes too. Spray on and wipe away any stains and grime. The product is safely being used by an increasing number of consumers and professional users alike. DIY Doctor is currently one of the largest home improvement websites in the UK. They are committed to putting the customer first, providing a platform for novice and experienced Home Improvers so they can get together with experienced tradesmen to share knowledge, skills and experience about anything to do with house and home. You can see their demonstration for PVCu Cleaner here.
Super Strength Degreaser removes grease, oil, grime, glue and even light carbon build-up. It is effective and pleasant to use, water-based, no abrasives with no H (hazard) or P (precautionary) statements on the labhttps://www.ecosolutions.co.uk/homestrip-xtex/el.
Graffiti Go removes all paints including car spray paints – Graffiti shadow – Leather dye – Marker pen -Crayons – Fly posters – Chewing gum and can be used on all types of surfaces including; woods, all metals (including Aluminium), stone (including soft and porous stones), brick, marble, concrete, most plastics (may etch certain types of Perspex and polycarbonate).
As well as X-Tex Artex Remover.
You can find your local stockist here.