Removing Varnish from……Home Strip® Paint & Varnish Stripper
Perfect for DIY and Up-Cycling Projects
Whether you are upcycling furniture or renovating a property, Home Strip® Paint & Varnish Stripper is a ‘Go-To’ product that you can use for Removing Varnish from all surfaces, quickly and safely.
Traditional Ways of Removing Varnish
Removing Varnish by Sanding
The traditional way to remove varnish from a surface has always been sanding, however, it is a laborious job and takes forever. You would use medium sandpaper (150 grit) to remove the top layers of varnish and then as you get closer to the original surface you want to remove the varnish from you would use finer sandpaper (220 grit). it takes a long time, makes a lot of dust and mess, is very labour intensive and hard work on your arms, hands and fingers. You need to sand the surface in stages and layers and then wipe it clean so you can then start on the next layer. You should wear a mask when you are sanding as you will breathe the dust fibres in and always wear gloves to protect your hands as much as possible. Flat surfaces are the easiest to sand, compared to curved surfaces and joins which are really tricky to completely remove the varnish from. When you have finished and all the varnish has been removed you should wash the surface with warm soapy water to remove any dust and leave it to completely dry before you treat the surface with anything else.
Removing Varnish using a Heat Gun
A heat gun works by softening and loosening the varnish making it easier to remove. It is surprising but a heat gun doesn’t scorch the wood or surface you are removing the varnish from, however, when you have used the heat gun to soften the varnich which is time-consuming you then also have the task of scraping the varnish to remove.
You should always wear protective goggles and gloves when using a heat gun and be really vigilant as you are doing it so as not to overheat the surface and burn yourself.